User manual

15
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
3.1.2 Function Keys
This section describes the functional keys on the front panel of
the DVR. Refer to the Setup Guide for the graphical illustration
of functional keys.
Power Key
When the quick shutdown function is enabled, press and hold
this key to quick shutdown the DVR. Refer to section Power Up /
Shutdown the DVR for more information about the setting of
quick shutdown function.
CHANNEL
 In both Live and Playback modes, press the CHANNEL key to
view the corresponding video in full screen. The number of
the CHANNEL keys corresponds to the number of cameras
supported by the unit.
 In Dome Control mode, press “1” to access the Set/Go Preset
menu.
 In OSD number keyboard, press keys “1” ~ “9” to input
number 1~9, and press key “10” to input number 0.
DOME (PTZ)
Press the key to enter dome control mode. Please refer to
section Dome Control for detailed controlling operation.
MODE (Display)
Press repeatedly to select for preferred monitor display format.
The available viewing modes includes: full-screen, 4-window (2×
2), 9-window (3× 3) and 16-window (4× 4). Refer to section
Viewing Modes for detailed information.
SEQ (Sequence)
Press to start automatic sequence display of video from all
installed cameras.
MENU
Press this key to enter the OSD setup menu.