User manual

17
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
PLAY/STOP
Press this key to switch between live image and playback video.
NOTE: According to record setting, part of the latest video
cannot be played back because the video is still saved in
the buffer.
FREEZE (Pause)
 Press FREEZE while viewing live image, the live video will be
frozen. The date / time information shown on the monitor will
continue updating. Press FREEZE again to return to live
mode.
 Press FREEZE while playing the recorded video, the
playback video will be paused. Press LEFT / RIGHT to move
the recorded video reverse / forward by single step. Press
FREEZE again to continue playing video.
SEARCH
 In both Playback and Live mode, press SEARCH to enter the
Search menu to search and playback recorded video by
date/time or events.
 Press twice to instantly playback the latest recorded videos.
ESC (Exit)
 Press to cancel or exit from certain mode or OSD setup menu
without changing the settings made previously.
 When password protection is switched off, press ESC for five
seconds to lock up the system. Press ESC for five seconds
again to unlock.
NOTE: Enter the OSD menu and go to <System
Setup>  <User Management> to enable or disable
the password protection.