User manual

19
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
3.2 Enter OSD Setup Menu
The configuration of the DVR can be customized by entering the
intuitive Graphical User Interface (GUI) OSD setup menu.
Collaborating with a USB mouse, setting up the DVR can be
easy as operating on a PC. Press MENU and select an account
to login.
The next step is to enter a corresponding password. The preset
password for the administrator account “admin” is “1234”.
NOTE: It is strongly suggested to change the preset
password to prevent unauthorized access to the unit.
An icon displayed at the status bar will show the authority level of
the account. Under logout condition, the “Guest” icon will be
displayed. When an account is logged in, its authority level
number (1~8) will be shown.
Before completely logout, other functions can also be accessed
without having to login again. There are two ways to logout:
manually logout by pressing ESC key at Live mode, or auto
logout when keys are not pressed for 5 minutes at Live/ Menu
mode.
3.2.1 User Management
The DVR provides the option to create up to seven sets of
usernames and passwords with customized authority, excluding
the preset “admin” account. From the Main Menu, select
<System Setup>  <User Management> and the menu is as the
following:
User Management
Password Protection
Account Setup
Permissions Setup
Load Default Setting
On
ENTER
ENTER
No