User manual

27
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
Date Display Mode
This function allows users to set the OSD display type of the date.
There are three options to select from: <Y/M/D>, <M/D/Y> or
<D/M/Y>. “Y” represents “Year”, “M” represents “Month” and “D”
represents “Day”.
Move to the item and press ENTER, the option starts blinking.
Use UP / DOWN keys to change the setting.
Time Display Mode
Users can set the time format to <12 HR> or <24 HR>. Use the
UP / DOWN keys to change the format.
3.4.2 Daylight Saving Time
Daylight Saving Time
The item is for those people who live in certain regions to
observe Daylight Saving Time. Select <ON> to enable, or <OFF>
to disable the function.
If the function is disabled, the DST Start / End time and DST Bias
will be grayed out and cannot be accessed.
NOTE: If this function is enabled, the date/ time
information will be shown on the screen with a DST icon
when playing back recorded video or searching video in
the event list. “S” indicates summer time and “W” indicates
wintertime.
DST Start / End
The items are used to program the daylight saving duration. Use
LEFT / RIGHT keys to move the cursor to the next or previous
field, UP / DOWN to change the settings in the selected field.
DST Bias
The item allows users to set the amount of time to move forward
from the standard time for daylight saving time. The available
options are in minutes.