User manual

28
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
3.4.3 Network Time Protocol Setup
Time Zone
Select <Time Zone> to setup the time zone. To find out the
correct local time zone, please visit
www.greenwichmeantime.com or refer to below figure.
NOTE: The <Time Zone> must be set to the correct local
time zone or the <Network Time Protocol Setup> will
not be accessible.
Network Time Protocol Setup
After setup the time zone, <Network Time Protocol Setup> will
be accessible. Select <NTP Server> to setup the time server.
The default time server is time.nist.gov, but the users can change
to any other time server if preferred. A list of IP addresses of the
time servers is listed below.
129.6.15.28
129.6.15.29
132.163.4.101
132.163.4.102
132.163.4.103
128.138.140.44
192.43.244.18
131.107.1.10
69.25.96.13
206.246.118.250
208.184.49.9
64.125.78.85
207.200.81.113
64.236.96.53
68.216.79.113
After the time server is set, set <Manually Time Sync> to <Yes>
to sync the time. The time sync can also be updated periodically.
Set <Automatically Time Sync> to <On>, and the time will be
automatically synced once an hour.