User manual

30
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
NOTE: Since a VBR file does not have a fixed size, the
HDD space usage cannot be calculated and thus
ezRecord function is not supported for VBR mode.
Therefore, if ezRecord is selected as the preset record
configuration, the option of this menu item will
automatically be set as <CBR>.
3.5.2 Schedule Setup
The Schedule Setup is used to set the day and night time, or
weekend recording schedule. Select <Schedule Setup> from the
Record Setup menu and press ENTER; the following menu is
displayed.
Schedule Setup
Day Time Start
Day Time End
Night Time Start
Night Time End
Weekend Schedule
Weekend Start
Weekend End
AM 06:00
PM 06:00
PM 06:00
AM 06:00
On
Fri PM 06:00
Mon AM 06:00
 Make appropriate changes of the start time of Day and Night
Time using Direction keys.
 Press ENTER to confirm the settings or ESC to cancel.
 If a weekend record is required, select <On> to enable the
Weekend Schedule in advance and then set the Weekend
Start/End time.
 Press ESC to return to previous page.
3.5.3 Preset Record Configuration
The <Preset Config> is used to select the preset recording
quality and frame rate. In normal circumstances, it is strongly
recommended to set the preset configuration as <Best Quality>.
Below table shows the PPS and picture size under <Best
Quality> in Half-D1 mode. Please refer to OSD Setup Manual,
section Preset Record Configuration for more detailed
information.