User manual

33
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
3.5.6 ezRecord Setup
This item aims to ease the complicated record settings, and to
make the setup much easier. Note that the item can be reached
only when <ezRecord> is selected as the option for <Preset
Config>.
Select <ezRecord Setup> from <Record Setup> and press
ENTER, the sub-menu appears as below figure:
ezRecord Setup
How Many Days To Record
Daytime Record
Night Record
Weekend Record
Average Normal PPS
Average Normal Quality
7 Days
Yes
Yes
Yes
15
Best
Follow these steps to Setup ezRecord:
 Select <How Many Days To Record> and press ENTER, then
press UP/DOWN to choose an option. The average normal
PPS & Quality will be adjusted automatically. The maximum
of days depends of the size of the installed HDD. In other
words, the larger the size of the HDD installed, the more days
the unit can record.
 Move to <Daytime Record> and press ENTER. This item will
determine whether the DVR will record during daytime. If yes,
use UP/DOWN to select <Yes> as to enable daytime
recording; or select <No> to disable.
 Repeat the same procedures through the 3rd and 4th item,
respectively. Note that <Weekend Record> will be
inaccessible if <Weekend Schedule> in <Schedule Setup> is
set to <No>.
 Select <Average Normal PPS> and press ENTER, then press
UP/DOWN to make a choice. The <How Many Days To
Record> will be computed automatically.
 Select <Average Normal Quality> and press ENTER, then
press UP/DOWN to make a choice. The <How Many Days To
Record> will be computed automatically.