User manual

40
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
manual.
Alert Notification Setup
Alert Configuration Set
Alert Notification
Alert IP
Alert Port
Alive Interval
1
OFF
0.0.0.0 NUM
9999
120 Sec
3.6.5.1 Alert Configuration Set
<Alert Configuration Set> provides 3 combinations of Alert
Notification, IP, Port, and Interval.
3.6.5.2 Alert Notification
4 options are included in this item: <OFF>, <Event>, <Alive>,
and <Both>.
<OFF>: The Alert Notification is turned off.
<Event>: When the alarm is triggered, the DVR will send an alert
message to the CMS.
<Alive>: The DVR will send an alive message to the CMS every
N second just to show you that the connection
between the DVR and CMS is in effect. The time
interval N can be adjusted in <Alive Interval>.
<Both>: This enables the DVR to send both Event and Alive
alert messages to the CMS.
3.6.5.3 Alert IP
The Alert IP must match the IP address of the computer installed
the CMS.
3.6.5.4 Alert Port
The ports for DVR and the CMS Alert MUST be the same.
3.6.5.5 Alert Interval
Users can define the time interval (1 to 255 seconds) between
each alive message.