User manual

Ernitec EDNS V1000 series – user manual

www.ernitec.com

V 2.2.082012

3.6.8.6 Alarm Out

This item allows users to enable/ disable the alarm output on the

selected channel to activate the relay. The signal can be a light

or siren to caution an alarm event. Select <ON> to enable the

alarm output, or <OFF> to disable.

3.7 POS Setup

The <POS> function provides a connection between the DVR

and a Point-of-Sale (POS) device, such as a cash register. With

this function, the financial transaction data can be linked to

specific camera images and recorded to the DVR. To enable this

function, enter OSD setup menu with proper account, and select

<POS>. Press Enter and the following OSD setup menu will

show up.

POS

POS Function

POS Overlay

Exception POS Setup

Input Setup

Live & PB

ENTER

3.7.1 POS Function

This item is used to enable/ disable this function. Select <On>,

the text database will be created on the hard disk.

3.7.2 POS Overlay

Users can decide when the POS overlay should be displayed on

the monitor. Select <Live> to display the POS overlay in Live

mode; select <PB> to display the POS overlay in Playback mode;

or select <Live & PB> to display in both modes.

NOTE: POS overlay will only be displayed in full-screen

mode.

NOTE: PB overlay is available only under ×1 PB speed.