User manual

45
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
3.7.3 Exception POS Setup
This sub-menu is used to define the conditions that are to be
treated as an “Exception” and thus trigger an action (the function
will be implemented later).
Exception POS Setup
Exception No.
Trigger
Exception String
By Numerals
Value
Value (Upper Limit)
1
On
NO SALE
Off
Exception No.
Select a number to set the exception parameters. The total is 16
exceptions.
Trigger
Select <On> to monitor if transactions satisfy exception
parameters. Once an exceptions is found, alarm will be triggered.
Exception String
Users can define Exception String. The “Exception String” is
case-sensitive. Only exactly matched ones will be marked as
exceptions.
By Numerals
“Exception String” must be defined before “By Numerals” takes
effect. If “By Numerals” is enabled, only transactions which meet
both “Exception String” and “By Numerals” criteria will be marked
as exceptions.
The selections are as the following:
<OFF>: The function is disabled.
<Specific>: When the value of a transaction meets a specific
value, it will be marked as an exception. That
specific value need to be defined in the following
sub-setting <Value>.