User manual

49
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
Various multi-window view formats are offered for selection. To
switch between available viewing formats, press MODE
repeatedly.
The available view formats are illustrated as the following figure.
NOTE: 3x3 viewing mode is only available in 8CH and
16CH models, whereas 4x4 viewing mode is only
available in 16CH models.
4.1.2 Digital Zoom
Users are able to view a 2× full screen in live mode. To view the
2× full screen, follow the steps.
 Press any CHANNEL key to view the corresponding camera
in full screen.
 Press ENTER to view 2× zoomed screen of the selected
camera.
 To view a specific area in 2× zoomed screen, use Direction
keys to pan / tilt the zoomed screen.
 Either press ENTER again or ESC to leave the Zoom mode.