User manual

55
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
 Move the cursor to year/ month and press ENTER. Then
press UP/DOWN keys to adjust the value and press ENTER
again to confirm.
 Move the cursor and press ENTER to select any date shown
in bold and underlined font. The bar below the calendar will
change according to the recorded data of the selected date.
 Then select preferred time from the time bar. Alternatively,
move the cursor to the time shown at the bottom. Press
ENTER and adjust the values of hour/ minute/ second via
UP/DOWN keys.
 The <From> and <End> buttons allows users to playback
video from the beginning or end of the database.
 Note that the time blocks highlighted in red represent events
occurred.
 Select <Begin Playback> and press ENTER to start playing
back selected video.
4.3.3 Search by Event
“Event List” allows users to search wanted video by event. The
Event List is displayed as below figure:
Event List
First Page
Date Time
2011/03/17 11:26:50
2011/03/17 09:53:03
2011/03/16 16:14:42
2011/03/15 03:45:31
2011/03/12 22:27:56
2011/03/12 10:09:29
2011/03/11 12:18:20
2011/03/10 05:16:00
2011/03/08 17:11:37
2011/03/08 16:29:10
2011/03/08 03:22:17
Ch.
2
5
3
1
1
7
6
4
2
8
2
Type
Motion
Alarm
Alarm
Motion
Alarm
Motion
Motion
Alarm
Motion
Motion
Alarm
The list displays events by date, time, triggered camera and
alarm type. As some events are deleted, others are displayed.
The latest recorded event video will be listed on the top.
Follow these steps to search event video through Event List: