User manual

62
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
4.4.2 Export Normal Video
To Export normal video to external device, follow these step:
 Press SEARCH and play wanted normal video by entering
date and time. Note if the screen is showing in multiple
channel mode, please make sure there is no window
displaying in Live mode, or the export will not work.
 After entering playback mode, play the video and press
COPY once to mark the starting point of the export video. The
playback continues.
 Press COPY again to mark the ending point of the export
video. Then the “ezBurn” window will display as below figure.
The information shown on the window is “read only”.
ezBurn confirmation
Selected Device: USB Storage Device
Exported Required Size = 11 MB
Real Export Range:
From: 2011/05/07 AM10:41:13
To: 2011/05/07 AM10:41:21
ENTER: YES ESC: NO
 Press ENTER to start the export; or, press ESC to abort.
 If there is no any exportable device connected to the DVR
unit, then a warning message will be shown on the screen, as
below figure:
No exportable device detected.
Please install the target device/media to the DVR.
Enter: Retry ESC: Exit
4.4.3 Export Event Video
To export event video, follow these steps:
 Press SEARCH and play wanted event video. To play event
video, refer to section Searching Recorded Video.
 After entering the playback mode, press COPY. The “ezBurn”
window will display as below figure. The information shown is
“read only”.