User manual

70
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
Hard Disk Drive
Requires 20 MB for software installation
Operating
System
Windows XP, Windows Vista, and
Windows 7
Web Browser
Microsoft Internet Explorer version 6.0 or
above
Monitor
Resolution
Minimum 1024 x 768 with 16-bit color
Network Card
10Base-T (10 Mbps) or 100Base-TX (100
Mbps) operation; must match the network
configuration
5.2 Installation of Software
Refer to the following description to install the remote monitoring
software.
5.2.1 Change Internet Settings
The PC operating with the remote monitoring software should be
set to accept ActiveX plug-ins. Please follow the steps to set the
Internet security settings appropriately.
 Before operating the remote monitoring software, please
check the IP address of the DVR. To check the IP address,
press MENU key on the unit and enter password to access
OSD setup menu. Select <System Setup>, <Network Setup>,
then <LAN Setup> to check the IP.
 Start the IE; it can be started either by clicking on the desktop
icon, or by using the Start menu to access it.
NOTE: Windows IE provides the ActiveX component
that is required when using the remote monitoring
software.
 Select <Tools> from the main menu of the browser, then
<Internet Options>, and then click the <Security> tab.
 Select <Trusted sites> and click <Sites> to specify its security
setting.