User manual

73
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
NOTE: Do not enter any leading “0” characters in the
address, for example, “192.068.080.006” should be
entered as “192.68.80.6”. If the default trigger port 80
is changed into another one, take port 81 for example,
the IP address should be entered as “192.68.80.6:81”.
 A version check starts to verify whether the remote monitoring
software was installed already, and also check if the version
is the same as that stored in that particular DVR. This
process may take up to 30 seconds.
 When the software is completely downloaded and installed,
the Login Screen is now displayed.