User manual

74
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
5.2.2.1 Login / Logout
Login using the same accounts setup in the DVR. The authority
is also the same as setup in the DVR.
One preset account “admin” and up to two other accounts can
access a DVR at the same time. Nevertheless, if the “admin”
account is currently accessing the unit’s OSD setup menu via
front panel of the unit, then the “admin” account at the remote
monitoring site cannot change the settings at the same time. The
“admin” account of the DVR has priority.
The following steps demonstrate procedures to view video from
remote unit:
 Start the remote monitoring software by entering the IP
Address of the DVR in the Address bar of the browser.
Alternatively, click on the Favorite entry for the unit (if the IP
address of the unit has been set).
 Enter the Username and password. The login username and
password can be saved to ease future login. The default
username and password is admin / 1234.
 Click <OK> to login to the DVR. The process may take a few
seconds.
 If the connection is made successfully, the main window will
display live video of the attached cameras.
If the IE browser is closed, the remote system is logout and
disconnected from the DVR at the same time.