User manual

75
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
5.2.2.2 Software Upgrades
If a new version of the remote monitoring software is available on
the DVR, upgrade will be prompted while accessing the unit.
Follow the steps to upgrade the software.
 The message as the above figure will be prompted. Click
<Yes> to accept version upgrade.
 Start the IE again and enter the IP address of the DVR in the
Address bar of the browser; or if the unit address is set as a
Favorite site, click the Favorites entry for the unit.
 When the software is completely downloaded and installed,
the Login Screen will be displayed.
5.3 Basic Operation
When a DVR is successfully connected, the main window of the
remote monitoring software will be displayed. Please refer to the
Setup Guide for the graphical illustration of functional items.
The functions on the remote monitoring software will be
described in the following sections.
5.3.1 View Live Video
View live video from the cameras attached to the DVR by clicking
<Live> button on the main window toolbar. Choose desired
display mode – full-screen, 2x2 windows, 3x3 windows, and 4x4
windows – after the live images of the DVR are displayed on the
main window. When a dome camera is connected and viewed in
single channel full-screen mode, the dome camera control