User manual

77
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
Dome ID (ID)
Click for changing the dome ID and protocol. Proper authority is
required to access this function.
Focus +/−
Use these buttons to adjust the camera lens to focus on objects
for a clear view. Click on <Focus +> to focus near or <Focus −>
to focus far.
Iris +/−
This item is used to open and close the iris to let more or less
light into the camera. Click on <Iris +> to open iris or <Iris −> to
close iris.
Zoom +/−
Users are allowed to zoom-in or zoom-out using the adjusting
buttons. Zoom-in to enlarge a certain area and zoom-out to view
more area.
Direction Button
This button is used to pan and/or tilt the dome camera. Click the
arrows in the directions to be viewed.
5.3.2 Instant Recording
The Instant Recording function allows users to record video
quickly to the PC.
NOTE: The Audio function is set to OFF as the default
setting.
5.3.2.1 Record Video Instantly
Follow the steps to start recording instantly:
 Click on the <Instant Recording> button.
 Select the destination folder to save the video.
 Click on the button again to stop recording.