User manual

79
Ernitec EDNS V1000 series – user manual
www.ernitec.com
V 2.2.082012
To playback remote video segments, follow these steps:
 Choose <Playback> in <Select> field for playback recorded
video.
 In <Start> field, users can change the date and time either by
typing desired numbers directly or using the arrow buttons.
To type directly:
Click on day, month and year of date field respectively, and
type the desired numbers directly. Follow above steps to
adjust the hour, minute and second of time field.
To use the arrow buttons:
Click on the arrow button next to the date field to display the
calendar; then click the left and right arrow at the top of the
calendar to change the date. Use up and down arrow next to
the time field to change to the wanted time.
 The other way to select date and time is by moving the blue
sliding bar.
 Click <OK> to start the playback, or click <Close> to abort.
 The other option <Download (.DRV)> in <Select> field
enables users to download the video segment of selected
date and time to the PC. The selection of time duration is the
same as described above. Files downloaded will be in *.drv
format.
5.3.3.2 Playback Local *.drv Files
The <Local Playback> tab allows users to playback *.drv video
files stored in the PC's hard drive.
Follow below steps to playback a downloaded *.drv file with the
remote monitoring software.
 Click <Open> and the file selection screen is displayed.
 Select the *.drv video file for playback and click <OK>.
 Click <OK> in the <Local Playback> Screen to start the
playback, or click <Cancel> to abort.
 View the video playback using the Playback controls.
 To end the playback, click <Live> to return to live video.