STANDALONE DVR 2007 MAR. Ver 1.
空 白頁
4CH STANDALONE DVR CONTENT 1、FEATURE 2 2、SPECIFICATIONS 3 3、INSTALLATION 4 4、FRONT PANEL 5 5、OPERATING MANUAL 6 6、VIEW CONTROL 8 7、PLAYBACK CONTROL 9 8、RECORD CONTROL 9 9、4 CHANNEL RECORDING HOURS 10 10、DVR Viewer User Guide 11 Warning !! Please use the certified hard driver below to avoid the compatibility problem.
CH STANDALONE DVR 1、FEATURE 1、Definitely Standalone. 2、Real Time Refresh Rate. 3、Display While Recording. 4、Frame Recording & Quad Recording. 5、Compatible of NTSC/PAL format. 6、Advanced MJPEG. 7、Manual / Motion / Programmed 8、Search by Time / Date. 9、Watch dog feature. 10、HDD Volume Indicator. 11、Can use USB to link PC, Player can search Time to Play、 saving and take photos functions. 12、Internal motion detect feature. 13、Remote Control. 14、Support Audio Recording.
4CH STANDALONE DVR 2、SPECIFICATIONS OPERATION SYSTEM Embedded RTOS Video Input NTSC/PAL Video Input Channel 4CH Composite Video Output Channel NTSC 1CH Composite 120 fps (4x30 fps) PAL 100 fps (4x25 fps) Recording Frame NTSC Max. 30 fps Rate(QUAD) PAL Max. 25 fps Recording Frame NTSC Max. 7.5fps(30 fps/4) Rate(EACH) PAL Max. 6.
4CH STANDALONE DVR 3、INSTALLATION REAR PANEL AUDIO IN VIDEO OUT VIDEO IN CH1 CH2 CH3 CH4 DC12V OUT (1) (2) (3) (4) (5) ( 1 ) Audio Input. (2) Audio Output. (3) Video Output : Corresponding to Video Input. (4) Video IN : Cameras to Video Input.
4CH STANDALONE DVR 4、FRONT PANEL (1) ( 9 ) (10) (2) (4) (7) (5) (6) (8) (3) (11) (12) (1) USB PORT (2) Record Indicator (3) HDD Indicator (4) Move Up / Camera 1 Display (5) Move Left / Camera 2 Display (6) Move Down / Camera 3 Display (7) Move Right / Camera 4 Display / Select (8) Menu / Show Percentage of the hard Drive recorded (9) Play / Pause (10) Record / Stop (11) Fast Reverse / Mute (12) Fast Forward / Sequence Switch -5-
4CH STANDALONE DVR 5、OPERATING MANUAL (MAIN MENU) MAIN MENU SYSTEM SETUP CAMERA SETUP RECORD SETUP RECORD SCHEDULE MOTION SETUP HARD DRIVE SETUP SYSTEM RESTORE ( ) : SELECT ( Press Press ) : SET ( ) : EXIT to select items, use to exit to enter.
4CH STANDALONE DVR is:"1" is:"2" is:"3" is:"4” TIME SETUP Select this item to set up current time. TIME SET ( 2004/12/17 18:00:30 ) : SELECT ( ): SET ( Press Press ): EXIT to select items, use to exit to enter. CAMERA SETUP CAMERA SETUP CAMERA LIVE ON/OFF RECORD ON/OFF BRIGHT SETUP CONTRAST SETUP COLORS SETUP AUTO SWITCHING ( ) : SELECT Press Press ( : CH1 : ON : ON : 5 : 5 : 5 : 2 ): SET ( ): EXIT to select items, use to exit to enter.
4CH STANDALONE DVR RECORD SCHEDULE RECORD SCHEDULE Press Press to select items, use to exit to enter. (1)Range: 0-24 hrs. (2)Set ”T” for continuous recording. (3)Set “M” for motion recording. (4)Set up ”-” to disable the recording. MOTION SETUP MOTION SETUP MENU CHANNEL-1 CHANNEL-2 CHANNEL-3 CHANNEL-4 SENSITIVITY SENSITIVITY SENSITIVITY SENSITIVITY -8- 0 0 3 5 (OFF) (OFF) . .
4CH STANDALONE DVR 7、PLAYBACK CONTROL (1)Press , and the system will play the latest event which you haven't seen before. (2)Press , and the system will enter the PLAYBACK EVENTS SEARCH MODE. (3)Each period is as four hour. SEARCH TIME HARD DRIVE : MASTER 04/04/01 02:47:56 - 04/04/01 02:47:56 01 TIME 02 TIME 03 TIME Press Press Press 2004/12/10 02:47:50 2004/12/10 02:47:50 2004/12/10 02:47:50 Selec t Start Date/ Time to End Date/ Time to select items, use to enter. to exit, select event / time.
4CH STANDALONE DVR 9、4CH RECORDING HOURS ON 80GB HARD DRIVE *Thereinafter a rough estimate a table for reference only, recording data quantity can follow an image a variation a rate somewhat different.
4CH STANDALONE DVR 10、DVR Viewer User Guide Introduction This document is the Operation Manual for the 4 CH Stand Alone DVR PCViewer. The application will show you stream image stored in the Storage Device (HDD, CF card, USB Memory Stick, etc.), which was previously formatted and recorded by the DVR. If any DVR-formatted Storage Device is connected to your PC, the application will automatically detect the Storage Device and show the recorded stream.
4CH STANDALONE DVR Execution Just double click the icon of PC Viewer. The application will try to detect physical storage devices installed at your PC and search for DVR storage device(s) among them. If there is DVR Storage Device, the application will automatically start playing.
4CH STANDALONE DVR (1) (12) (11) (2) (3) (4) (5) (6) (7) (8) (9) (10) (1) Screen (7) PC Viewer Playback Control (2) Positioning Slider Bar (8) Capture Stream Button [MYS] (3) MYS Player Button (9) Screen Capture Button [JPEG] (4) DVR Storage Device Change Button (10) Audio Control (5) DVR Storage Device Information (11) Viewer Playback Mode (6) Channel Selection (12) Stream Time Display Fig.2. DVR Storage Device PC Viewer User Interface B. Functions i.
4CH STANDALONE DVR iii. DVR Storage Device Information Button If you want to know how big is the DVR storage device is, or how much stream data is stored in the device, press this button. Fig.4 shows the DVR storage device information window. Fig.4. DVR Storage Device Information Window iv. Channel Selection Buttons According to the record channel setting of the stream, each channel buttons will be enabled. Select any channel you want to see enlarged. Fig.5.
4CH STANDALONE DVR vi. Capture Stream Button If you want to capture stream, follow the stream capture procedure listed below: * Using Positioning Slider Bar find the stream position you want. * Make sure that the playback is in PAUSE mode, and the Capture Stream Button is enabled. * Press the button, then the application will start capturing. During capturing, Capturing Indicator Window will be popped up. Fig.7. Capturing Indicator Window * To stop capturing, press Stop Capturing button on the window.
4CH STANDALONE DVR (1) (2) (3) (10) (4) (6) (5) (7) (8) (9) (1) Screen (6) MYS file information (2) MYS File Select Dialog (7) MYS File Playback Control (3) Positioning Slider Bar (8) Screen Capture Button [JPEG] (4) PC Viewer Button (9) Audio Control (5) File Open Button (10) Playback Status Fig.9. MYS File Player User Interface B. Functions i. PC Viewer Button When you want to back to PC Viewer function, press this button. ii. File Open Button Press this button to select MYS file.
4CH STANDALONE DVR vi. Audio Control Fig.11. Audio Control Buttons Press button to enable sound. Once sound is enabled, the button icon will be changed to .
H12C420003