Specifications

Getting started
Remote Control
For the remote control two Micro type batteries: LR 03/AAA/1,5 V are required.
> Open the battery compartment
> Insert two batteries according to the polarities mentioned into the battery
compartment.
> Push the cover of the battery compartment carefully – until the cover is locked.
> Replace discharging batteries on time. Otherwise, the sending capacity of the
remote control will be too low.
> Always replace both batteries simultaneously and use batteries of the same type.
> Check the batteries of your remote control at least once a year.
> If one battery has leaked, wear protective gloves and clean the battery compartment with
a dry cloth.
CAUTION!
Batteries may contain toxic agents that are hazardous to health and environment. Therefore,
dispose of the batteries in any case according to the prevailing statutory regulations.
Never throw the batteries into normal household waste.
The remote control transmits infrared signals to the receiver. Please refer to the overview of
the remote control for the functioning of the keys.
> Point the remote control towards the front side of the receiver and slightly press the co
responding key once.
Page 12
MXL020HD INSTRUCTIONS REVISION.indd 12 15/05/2013 14:12