Specifications
Suitable location:
Cautions!
Information on separation from power source. The Standby key of this device will not
separate the device completely from the power source. In addition, the device will draw
current. To separate the device completely from the power source, the mains plug must
be pulled out of the socket.
• Place the receiver on a stable and even base.
• Use the receiver only with adequate climatic conditions.
• Avoid proximity to:
heat sources, e.g. heaters, naked ames, e.g. candles,
devices with strong magnetic elds, like e.g. loudspeakers.
• Never place receptacles lled with liquid (vases) on the receiver
• Avoid direct sunlight and places with an extremely high amount of dust.
• Never cover ventilation slits. Provide for sufcient ventilation by
maintaining a safety distance of 5 cm to other objects.
• Do not place any heavy objects on the receiver.
• Humidity may settle in the receiver if it is brought into hot surroundings
from a cold one. In this case, wait for about an hour before operating the
equipment.
• Arrange all cables in such a manner that no-one steps or trips over them.
Correct battery handling:
• Batteries may contain toxic agents. Ensure that batteries are not within
the reach of children. There is a danger children may swallow batteries.
• Batteries that are getting discharged may damage the remote control.
If the receiver is not in use for a longer period of time, remove the batteries
from the remote control.
• Batteries may contain toxic agents. Therefore, dispose of the batteries
immediately in an ecologically accepted manner according to the prevailing
statutory regulations. Never throw the batteries into normal household waste.
• Never expose the batteries to open re or strong heat, as otherwise there is a
danger of explosion.
• Replace the batteries always by batteries of the same type.
Page 5
MXL020HD INSTRUCTIONS REVISION.indd 5 15/05/2013 14:12