Specifications

CAUTION
NEVER ROTATE
THE BLADE
OR THE
DRIVE
GEAR...IT WILL RUIN
THE MAIN
ASSEMBLY.
There
are several
switches which will
jam
if manually turned
counterclockwise
and
the
gears
will be
destroyed if turned
clockwise.) lf
you
need to
advance
the ice
maker
into the cycle,
use a
jumper
to
bridge H to T
and unless the motor is
defective, it
will
run.
(The
shut-off arm
must
be
in the
"On"
position.)
NOTE: There
are
several slotted shafts on
the
motor
assembly
board. Do not under
any circumstances insert
a screwdriver
and attempt to turn these
shafts. The
slots
are
to
permit
assembly
only.
NOTE:
There
are
no repairable
or
replaceable
components in the module.
Unless
you
are replacing
the module,
there
should
be
no need
to remove it when
diagnosing
or repairing the ice
maker.
MODULE
COMPONENTS
Shut-off
arm
linkage
Cam
Follower
Ground
(Slightly
longer
than
other 3
terminals
so that
ground
makes first
and breaks
last
when
disconnected
or
plugged
in.
6-12