Specifications

29. Just as
you
did above for the
treezer
door, move
all of the
handle
and trim
parts
to the
opposite side of the
door and
reinstall.
This
is
done by reversing
the
steps
above.
NOTE:
Care
must
once
again be
taken
to make
sure
all
spacer
pads
are
returned
to
their
proper position.
30. Reinstall
plugs
into
screw
holes
exposed
on the right
hand
side
of the
door.
31. Reinstall the refrigerator
door.
Lower refrigerator
door
so socket on bottom
fits
onto the
pin
on bottom
hinge
bracket.
Be
sure washer is in
place.
Tilt
door towards
cabinet
and
gently
push
door
under
center
hinge
bracket
and align with the hole
in the
center
hinge
bracket.
Reinstall hinge
pin
with
5116"
socket and rachet
so it extends
through
hole
in
center
hinge
bracket
and into
bracket on top
of refrigerator
door.
32. Reinstall
the freezer
door. Lower treezer
door
so socket
on bottom
f its
onto the center
hinge
pin.
Be
sure washer is
in
place.
Tilt
door towards
cabinet, lifting
the
top hinge
so the
pin
fits
into the
socket
on top of the
door.
Tighten
the top hinge
screws
after supporting
the
door
on the handle
side and
aligning
so
the
gap
between the
door is
even
all across the
front.
2-12