Specifications

NOTE: Always use a
purge
hose
of
sufficient
length to discharge
the refrigerant
out of the
work
area
-
preferably
out doors. Keep work
area well ventilated
when
purging
or
dis-
charging refrigerant. WEAR GOGGLES TO PREVENT
EYE INJURY
when handling
refriger-
ant.
It is important
a
heated
charging cylinder equipped with
an automatic
pressure
relief
valve
be used to enable charging the
system
properly.
Most charging
cylinders
currently avail-
able have
heaters
or
heater
kits available. Never
use an
external heat
source such as
a
heat
gun
or torch for heating refrigerant in
a charging cylinder.
COMPRESSOR INOPERATIVE
In
addition
to the
previous
equipment, the following is
needed:
Purge Hose
Temporary
Piercing Valve
NOTE: Instead
of
a second
purge
hose an
additional three foot
charging hose
and
"T"
adapter can
be used to
enable
purging
both access valves
through
a common
purge
hose.
3-15