Specifications

Make
an offset
1/2 inch
from the end
of
the
cap tube to
prevent
it from
penetrating
too far into the
drier.
Cut the inlet tube
of
the replacement
drier
and use
pliers
to
snap off
the
scored end.
lnstall the new
drier using silver solder with
the
proper
flux.
11.
Evacuate, leak test
and recharge the
system.
12. Pinch
off the
process
tube
and
remove
the
service valve
and braze the
end shut. Leak
test the
process
tube.
d.
e.
f.
4-3