Specifications

CANTILEVE
SHELVES
I'
lff
Side-By-Side
Models
To
remove:
1. Llft the right
end up slightly and
push
the
shelf as
far to the right
as
it
will
go.
2. Lift the left
end up approximately three
(3)
inches
out of sockets and
pull
the
right
out of
the
sockets.
Reverse
procedure
to reinstall.
R
(FRESH
FOOD)
To
Remove:
The
cantilever
shelves are
adjustable and
mount
onto
brackets
attached to the liner
rear.
The
shelves are removed
by lifting
up on
the
shelf
at
the
rear
and
front,
then
pull
out of
brackets.
To reinstall:
Insert
shelf so the insert
hooks
fit into
selected
openings in
brackets.
Let
shelf
settle down into
position.
CANTILEVER
SHELF TRIM
The
cantilever
shelf
trim
is easily removed
by
placing
the shelf
on a
flat
work
surface
and
using a straight
screwdriver to
carefully
pry
on the
rolled
edge. The trim
is
installed
by
placing
the
shelf in
a
vertical
position
and forcing the
trim onto
the metal
piece
until it
snaps securely
in
place.
CRISPER SHELVES
To remove:
1. Remove
all cantilever
shelves
in order
to
allow removal
of crisper,
2. Remove
crisper
drawers by
pulling
out
to the
stop. Lift
and
pull
again.
3.
Carefully remove
glass.
The
glass
just
lays
on the
shelf.
4.
Lift crisper
shelf
and
pull
forward.
Tilt
to
one
side to remove
f rom
ref rigerator.
5. The
crisper shelf rod
can
be
removed
by lifting
up on the rod
until it is in the
top
of the
grooves.
Push in
on one
side and lift
up the other
side of the
rod to clear.
Reverse
procedure
to
reinstall.
5-2