Quick Start Guide

OPERATING INSTRUCTIONS
WARNING: To reduce the risk of re, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in
your appliance’s Owner’s Manual, before operating this appliance.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
Step 1. Clean Lint Screen
Step 2. Load Clothes; then Close
Door
Step 3. Press Power Button
Step 4. Select Cycle and Settings
Step 5. Press, Hold, & Release
“Hold to Start” Button
More Dry
Heavy Duty
Air Only
Timed Dry
Quick Dry
Less Dry
Delicates
Bulky Items
Towels
Wrinkle Control
Normal Dry
Timed Cycles
High
Med
Ex Low
Low
90
60
15 min
30
Wrinkle
Prevent
WetSense Cool Done
Hold to Start
Temp Options
Cycle
Signal
Time
Cycle Guide – Normal Cycle
SENSOR DRY- Senses moisture in the load or air temperature and shuts o󰀨 when the load reaches
the selected dryness level.
Not all cycles and settings are available on all models.
Items to Dry: Cycle: Temperature: Description:
Jeans, heavy
work clothes,
towels
Heavy Duty High
Medium
Low
Extra Low
Automatic cycles give the best
drying in the shortest time. Drying
time varies based on fabric type,
load size, and dryness setting.
Select a drying temperature based
on the fabrics in your load. If you
are unsure of the temperature
to select for a load, select the
lower setting rather than the higher
setting.
Work clothes,
medium-weight
fabrics, sheets
Normal Dry High
Medium
Low
Extra Low
Casual, shirts,
pants, lightweight
items, synthetics,
delicates,
athletic-wear
Wrinkle Control High
Medium
Low
Extra Low
NOTE: This clothes dryer’s, Government energy certications were based on the Timed Dry Cycle,
and Maximum Drying Temperature Setting. The as - shipped defaults of Normal Dryness, Wrinkle
Prevent O󰀨, were used.
NOTE: If loads do not seem as dry as you would like, select More Dry the next time you dry a similar
load. If loads seem drier than you like, select Less Dry the next time you dry a similar load.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation
tips, please see the Owner’s Manual included with your machine.
For information on any of the following items, the full cycle guide, detailed product dimensions, or
for complete instructions for use and installation, please visit https://www.maytag.com/owners, or in
Canada https://www.maytag.ca/owners. This may save you the cost of a service call.
Dryer Quick Start Guide
United States:
1–800–344–1274
Maytag Brand Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
Canada:
1–800–688–2002
Maytag Brand Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
Button Descriptions
1. POWER
Press “Power” button to turn on/o󰀨 or to stop/cancel a cycle.
2. CYCLE KNOB
Turn knob to select desired cycle.
When using an Automatic Dry cycle the sensors will monitor
moisture and heat levels and automatically stop the cycle at the
right time.
When using a Timed Cycle, the length of time for the cycle to run
by pressing the Time button (15, 30, 60, and 90 minutes).
See online “Cycle Guide” for detailed cycle descriptions.
3. START/PAUSE
Press, hold, and release the “Hold to Start” button to start the
cycle.
Press during a cycle to pause it. Press, hold, and
release to resume cycle.
4. STATUS INDICATOR LIGHTS
Monitors and displays the cycle progress from Sensing to Done.
5. CYCLE OPTIONS AND MODIFIERS
TEMPERATURE
Press “Temp” Button to modify the cycle’s available temperature.
(Extra Low, Low, Medium, and High)
TIME (Air Only, Timed Dry, and Quick Dry Cycles only)
Press “Time” Button to modify the time for the times cycle between
15, 30, 60, and 90 minutes.
WRINKLE PREVENT
Press “Options” Button to turn on/o󰀨 the wrinkle prevent option.
Wrinkle prevent adds up to 150 minutes of periodic tumbling and
heat to help reduce wrinkles.
CYCLE SIGNAL
Press “Cycle Signal” Button to turn the signal indicating the end of
drying cycle on and o󰀨.
Not all features, cycles, and options are available on all models. Appearance may vary.
REGISTER
PRODUCT
MANUALS &
DOWNLOADS
TROUBLESHOOTING
& FAQ
REPLACEMENT PARTS
ADD SERVICE PLAN
SCHEDULE SERVICE
FILTERS
REBATE & PROMOS
However, if you need to contact us, use the information listed below for the appropriate region.
High
Med
Ex Low
Low
90
60
15 min
30
Wrinkle
Prevent
WetSense Cool Done
More Dry
Heavy Duty
Air Only
Timed Dry
Quick Dry
Less Dry
Delicates
Bulky Items
Towels
Wrinkle Control
Normal Dry
Hold t o Start
Temp Options
Cycle
Signal
Time
Timed Cycles
1
3
2
5
4