Installation Guide

2
Optional tools:
Parts supplied:
NOTE: All parts supplied for installation are in the
washer basket.
Adjustable or open-end
wrenches 1/2" (13 mm),
5/8" (16 mm) and 9/16" (14 mm)
Ruler or measuring tape
Level
Pliers that open to
1
9
⁄
16
" (39.5 mm)
Flashlight Bucket
Cable tie Drain hose with clamp
and form (may be shipped
unassembled)
Tools needed:
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather required tools and parts before starting installation.
Available accessories:
An optional matching pedestal is available for your washer.
Please contact your retailer for ordering information, or see
the “Assistance or Service” page on the back of your Use
and Care Guide.
Alternate parts (not supplied with washer):
Your installation may require additional parts. To order, please
refer to toll-free numbers on the back page of your Use and
Care Guide.
If you have: You will need:
Overhead sewer Standard 20 gal. (76 L) 39" (990 mm)
tall drain tub or utility sink, sump pump
and connectors (available from local
plumbing suppliers)
Alternate inlet hoses (may be required for some
installations, not supplied with washer):
n
 8212656RP
10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
n
 8212641RP
5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
n
 8212546RP
4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
n
 8212545RP
5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
(2 pack)
n
 8212487RP
5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
n
 8212638RP
6 ft. (1.8 m) Nylon braided inlet hose,
space-saving 90° elbow, hypro-blue steel
couplings (2 pack)
Parts needed (not supplied with washer):
Water inlet hoses (2)
Flat inlet hose washers (4)