User Manual

13
Bluetooth Pairing & Operation
If a PIN Code is Required:
● Some Bluetooth devices require inputting a pass code for
connection. Please input code “0000” and the connection will be made
automatically.
Automatically Connecting:
● Once the multimedia controller has made a connection with the
Bluetooth mobile device for the rst time, the unit can then connect to
the Bluetooth mobile device automatically within a valid range.
Manually Disconnecting:
● To disconnect temporarily, for example to take a phone call,
press and hold the 1/ button for 3 seconds and the mobile device
will disconnect. If no phone call is in progress, it will automatically
reconnect to the unit in about 15 seconds.
● To disconnect and allow another user to connect, use the mobile
device to forget the "MB QUART" connection entirely.
Once a Bluetooth device is paired and recognized:
● Be sure the multimedia controller has the Bluetooth source selected.
The multimedia controller should automatically begin playing where
the mobile device last left off of the music player's song or playlist.
● If the unit does not automatically begin playing, press the center ►
▌▐
button to play the Bluetooth source. The play (►) symbol will display
when music is playing.The time elapsed in the song play is also
displayed on the screen.
● Press ►
▌▐
again to mute and pause the song. The pause (
▌▐
)
symbol will display when music is paused.
● Press ►
▌▐
again to resume playback or simply rotate the volume
control knob.
● Press the
▌
◄◄ or ►►
▌
buttons more than 1 second to manually fast
forward or rewind within a song. Press the same button again to stop
the fast forward or rewind function.
● Press the
▌
◄◄ or ►►
▌
buttons less than 1 second to automatically
fast forward or rewind the next / previous song.
Note: Functions such as "Repeat" and "Random Play" (a.k.a "Shufe") must be controlled
at the mobile device directly.
See the USB Input section for smartphones connected via USB and
the capability for Repeat and Random (Shufe) functionality.