User Manual

17
SETTINGS Menu
To access SETTINGS, press Selector/Volume knob in any source.
The "SETTINGS" menu appears immediately. Alternatively, select
"SOURCE" and navigate to the SETTINGS icon ("Gear" icon), then
press the Selector/Volume knob to access the menu.
● Use the Selector/Volume knob to navigate the menu items. When the
gray highlighted bar is on the chosen parameter, press the Selector/
Volume knob to go into that menu (or sub-menu). This is similar to
an "Enter" command. Use the Selector/Volume knob to navigate
parameters within the menu. Once the parameter is set, use the
SOURCE button to go back to the previous screen.
Equalization (EQ)
● Use the Selector/Volume knob to
select the 8-band graphic EQ.
● Navigate each EQ band by turning
the knob and select the band by
pushing the knob.
● Adjust each band as desired, then
push the knob again to move to
another band.
● Use the SOURCE button to close the EQ screen when complete and
return to the main menu.
Clock Mode
● Access the clock mode menu to
adjust 12 hour (USA) and 24 hour
(Europe/World) clock.
● Verify preferred setting with the
check marked choice.
● Use the SOURCE button to close
the clock mode screen when complete and return to the main menu.
1/
2/INT 3/RPT 4/RDM
Source
Use the Selector/Volume knob to navi-
gate the main menu by turning to scroll
and pressing to enter a specic feature
or sub-menu.
Press the Selector/Volume knob in
any source, or select the "Gear" icon.
8 EQ Bands: 62Hz, 125Hz, 250Hz,
500Hz, 1KHz, 4KHz, 10KHz and 16KHz