User Manual

19
BASS Level
● Adjust the bass from -7 to +7. Default setting is “0.” Center frequency
is 100Hz.
TREBLE Level
● Adjust the treble range from -7 to +7. Default setting is “0.” Center
frequency is 10KHz.
BALANCE Control
● Adjust the balance between the left and right speakers using the grid
on the screen and the Selector/Volume knob to move the dot. Equal
balance (center dot) is the default setting.
● Use the SOURCE button to close the balance screen when
complete and return to the main menu.
FADER Control
● Adjust the fader between the front and rear speakers using the grid
on the screen and the Selector/Volume knob to move the dot. Equal
fader position between front/rear (center dot) is the default setting.
● Use the SOURCE button to close the fader screen when complete
and return to the main menu.
Factory Reset
● This setting resets the unit to its factory defaults. Be cautious
when entering this menu if you don't want to manually reset all
your preferences such as radio presets, EQ, sub level/crossover,
backlighting, etc.
Video Output Feature
● The multimedia controller features a composite video output that
mirrors the same information on the unit's screen. This is a useful
feature to provide a secondary screen for passengers or in other
zones within a larger space, such as a boat or RV.
● Simply connect the unit's
"CVBS-OUT" to the composite
video input of a secondary
screen.
Although the balance and fader adjust-
ments are two separate screens, for
purposes of easy understanding they are
shown here in the same screen. Left and
right of the grid represent the balance.
Top (front) and bottom (rear) of the grid
represent the fader.
Camera Input
CVBS-OUT
Video Output
Connect to
2nd Screen