Owner's Manual

Page 2 of 22
Disassembly
● To get to this point will be Step 1
to 4 from the speaker installation
Remove (5) Phillips screws from
center dash/screen area
● Unclip lower center console and
move toward rear of vehicle
Step 1
Step 2
Step 3
● Disconnect large main harness
connector on back of radio
screen. Then connect the
PAC Audio T-Harness into the
radio and the OEM connector
into the T-Harness. (for more
information on the PAC Audio
interface and wiring please refer
to the instructions provided in the
interface box)