Owner's Manual
Table Of Contents
Page 14 of 22
Wiring Install & Assembly
● Connect the remote wire to the
PAC Audio pigtail harness, then
connect the interface box to the
pigtail harness, (at this point the
RCAs can be plugged in and
reference the labels to connect
properly)
● Place the PAC Audio interface
box (like pictured)
Note – If you choose to use the
included knob from PAC to control
the subwoofer and door chime
volume, then place somewhere
easily accessible in the vehicle
Step 34
Step 35
● Place amplier power
connections under passenger
seat routing power wire along
OEM wiring toward oor grommet
(Also connect the remote wire at
this time)
Step 36