User guide

2007 Cadillac Escalade EXT/ESV & GMC Yukon Denali XL 6.2L
Removal of stock system:
Figure 1
Figure 2
Figure 3
1. Apply a penetrating lubricant liberally to all exhaust
fasteners, hangers and rubber insulators.
2. Remove the hangers from the rubber insulators and
remove the exhaust from the vehicle. The tail pipe will
need to be cut to clear the rear axle.
Refer to Figures 1&2
3. Remove the hardware holding the front flange together
and disconnect exhaust system.
Refer to Figure 3
4. Remove the exhaust from underneath the vehicle.
Refer to Figure 4
Figure 5
Removed stock system
Figure 4
S5034 12/07
Page 2 of 3