ISO 9001 CERTIFIED CX-1203 12 Channel DMX Console 【User manual】 Lite-Puter Enterprise Co., Ltd. website:www.liteputer.com.tw E-mail: sales@liteputer.com.
ISO 9001 CERTIFIED Chapter 1. CX-1203 Instruction 1-1 Feature Standard DMX 512 signal control 12 dimming control channel 12 control scene setting Chaser function: 1.) Channel chase 2.) Scene chase 3.) Fade chase 3.) Speeding control 4.) Chase Function Flash Audio input 1-2 Specification Power supply Control signal Control channel Connector Audio input DC 12V/ 1A DMX512 / 1990 12 channel XLR 3-pin(x1), XLR 5-pin(x1),phone jack RJ11(x2) Max. input:-10 db 100mV Weight Dimension 1.
ISO 9001 CERTIFIED 1-3 CX-1203 Function 1 CX-1203 12CH.
ISO 9001 CERTIFIED 1-4 CX-1203 Rear panel PUSH ON CONTROL PUSH 5 DC 12V IN 13 4 OFF AUDIO IN DMX OUT DMX OUT 14 15 16 17 13 Power supply: DC 12V / 1A 14 Power switch 15 Audio input: 100mV 16 DMX connector: XLR 5-PIN 17 DMX connector: XLR 3-PIN 18 DMX connector: PHONE JACK (RJ11) 1 3 2 1:GND 2:Data3:Data+ 4:NC 5:NC 1 2 3 1:GND 2:Data3:Data+ 4 3 21 4 3 2 1 1:V+12V 2:Data+ 3:Data4:GND 18 1-5 CX-1203 audio sensitivity control 19 Audio sensitivity control 19 3 Lite-Puter
ISO 9001 CERTIFIED Chapter 2. CX-1203 operation 2-1 SCENE setting Select【CH】mode, and move the fader to set the dimming value press【PROG】+【1~12】 to save control scene. STEP-1 press【SC / CH】to select the control channel LED : off in CH mode LED : on in SC mode STEP-2 move【MASTER-VR】to the top STEP-3 move【VR-1 … VR-12】to dimming STEP-4 press【PROG】+【1…12】to confirm and save the selection 1.
ISO 9001 CERTIFIED 2-3 CHASE (1) Internal chase setting (SPEED CHASE) (2) Audio input control (AUDIO) 2-3-1 Internal chase setting ( SPEED CHASE ) 2 mode of chase setting: (1) in【CH】mode : Chase by CH mode (2) in【SC】mode : Chase by SC mode 【CH】mode STEP-1 press【SC/CH】, to select the channel. (LED ”off”) STEP-2 to select the chase. 1. Led : ● on ○ off press【CHASE 1】 CH.
ISO 9001 CERTIFIED 【SC】mode STEP-1 press【SC/CH】, to select the SC mode STEP-2 to select press【CHASE 1】:to execute the SC-1…SC-4 chase. press【CHASE 2】:to execute the SC-5…SC-8 chase. press【CHASE 3】:to execute the SC-9…SC-12 chase.