GP7000 parts and service manual It is the OWNER'S RESPONSIBILITY to communicate information on the SAFE USE and OPERATION of this machine to the operators ! MBW INC. P.O BOX 440 250 HARTFORD ROAD SLINGER, WI 53086-0440 PHONE: (262) 644-5234 FAX (262) 644-5169 MBW CORPORATE INTERNET ADDRESS EĆMAIL: mbw@mbw.com L1315 / 01.05 D MBW Inc 2005 Printed in U.S.A. WEB SITE: www.mbw.
TABLE OF CONTENTS SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY DECALS & LOCATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 MBW WAREHOUSE LOCATIONS . . . . . . . . . . . . . . . . . . . . . . . . . 4 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SERIAL NUMBER LOCATION . . . . . . . . . . . .
SAFETY PRECAUTIONS BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING SAFETY INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS WITH THIS EQUIPMENT IS FAMILIAR WITH THESE SAFETY PRECAUTIONS. WARNING - LETHAL EXHAUST GAS! An internal combustion engine discharges carbon monoxide, a poisonous, odorless and invisible gas when operating. Death or serious illness may be caused if inhaled.
SAFETY NOTICE & DECALS IMPORTANT NOTICE The SAFETY ALERT SYMBOL" is used to call attention to items or operations that may be dangerous to machine operators or others working with this equipment. The symbol can be found throughout this manual and on the unit itself. Please read these messages carefully. READ SAFETY DECALS CAREFULLY Carefully read and follow all safety decals. Keep them in good condition. If decals become damaged, replace as required. If repainting, REPLACE ALL decals.
WARRANTY WARRANTY THIS IS YOUR WARRANTY - PLEASE READ AND SAVE 1. MBW Inc., Slinger Wisconsin, warrants each new machine against defects in material and workmanship under normal use and service for a period of six (6) months. This warranty commences the first day the machine is sold, assigned to a rental fleet, or otherwise put to first use. 2. The obligation under this warranty is limited to the replacement or repair of parts and/or machine at MBW Inc. factory branches or at authorized MBW Inc.
MBW WAREHOUSE LOCATIONS is at your service MBW Inc. has established a network of reputable Distributors with trained mechanics and full facilities for maintenance and rebuilding, and to carry an adequate parts stock in all areas of the country. Their sales engineers are available for professional consultation. If you cannot locate an MBW Inc. Distributor in your area, contact one of our Sales Branches or MBW Inc. The locations and phone numbers of the Sales Branches are listed below.
SPECIFICATIONS GENERAL SPECIFICATIONS GP7000 7900lbs (3585 kg) 2800 100 ft/min (30 m/min) 30 in (76 cm) 26 x 30 in (66 x 76 cm) 653 lbs (296 kg) CENTRIFUGAL FORCE* EXCITER VPM TRAVEL SPEED COMPATION DEPTH WIDTH AND LENGTH OPERATING WEIGHT (HONDA) ENGINE SPECIFICATIONS Honda GX340 Yanmar L100AEĆD Kohler K301T 07767 11929 00802 DISPLACEMENT 20.6 cu in. (337 cc) 24.78 cu in. (406 cc) 39.07 cu. in. (467 cc) BORE & STROKE 3.23 x 2.5 in (72 x 64 mm) 3.39 x 2.76 in. (86 x 70 mm) 3.38 x 3.
SERIAL NUMBER LOCATION PLATE SERIAL NUMBER 1. Located on the top of the engine deck, behind the engine. (Write Serial Number in box.) 2. The serial number is also stamped on top of the exciter housing. PARTS ORDERING PROCEDURE The Warranty is stated in this book on page 3. Failure to return Warranty Registration Card renders the Warranty null and void. An Operating Instructions and Parts Catalog for the engine is also furnished. Engine Parts may be orĆ dered from any authorized dealer.
OPERATING INSTRUCTIONS INTRODUCTION MBW Inc. Compaction Equipment is intended for use in very severe applications. They are powered by four stroke engines and are available in different sizes and a selection of engines. This parts manual contains only standard or standard option parts. Variations of these parts as well as other special parts are not included. Contact your local MBW Inc. Distributor for assistance in identifying parts not included in this manual.
OPERATING STARTING ENGINE STOPPING For detailed instructions refer to Engine Manual. 1. To stop compactor from traveling forward return engine throttle to idle position. 1. When starting engine, THROTTLE MUST BE IN AN IDLE POSITION. Open fuel valve. Choke engine if necessary, (when starting a warm engine it may not be necessary to choke it). 2. Whenever possible, it is recommended to let the engine idle before stopping. 2. Pull starter rope.
PERIODIC MAINTENANCE ENGINE MAINTENANCE AIR CLEANER 1. Your Compactor uses either a dry type air cleaner element or a Dual" Oil-Foam and Paper Element. Clean the dry element or Oil-Foam" element every 25 hours under normal conditions and every few hours under extremely dusty conditions. a. CAUTION! Oil in exciter is HOT after machine has been running! Where protective gloves when working with oil. Clean the dry element by tapping it lightly on a flat surface. Keep tapping until no dust comes off.
REPLACEMENT AND TOLERANCE CHART Part TOLERANCE OR REPLACEMENT CYCLE Air Cleaner Element Replace after 75 hours if Engine is operating under good clean air conditions. Service and replace more frequently if under extreme dusty or dirty conditions. Bearings Replace anytime a Bearing is rough, binding or discolored. Clutch Replace the Shoes and Spring if they show signs of heat damĆ age or the Clutch does not disengage below 2000 rpm.
FIGUREā1 MAIN ASSEMBLY DETAILS 00716 00744ĆLA 00744ĆLB 00744ćRA 00744ĆRB F081318HCS F08LW F0813HN 05940 05939 F12LW 00813 00746 F042008HCS F05SW F04LW F0420HN 00048 F0518FN F0820HN 07661 F06LW F0616HN F061612HCS F081310HCS 07795 07798 07799 00766 07797 F061614HCS 06333 00749 F061606HCS 00730 00763 00732 07014 F0212CP 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 HOUSING MOLD BAR, LEFT FRONT MOLD BAR, LEFT REAR MOLD BAR, RIGHT FRONT MOLD BAR, RIGHT REAR HHCS, 1/2
NOTE: Use only MĆBĆW Ground Pounder Oil purchased in six packs, Part No. 01058 FIGURE 3 EXITER OIL LEVEL CHECK ITEM NO. PART NO. DESCRIPTION QTY.
12 13 11 10 FIGURE 4 HONDA GX340 DETAILS ITEM NO. PART NO.
17 20 18 13 14 21 15 1 3 5 PTO SIDE 10 2 11 16 9 30 23 32 25 29 26 31 28 24 7 27 4 8 6 SPRING ATTACHES AS SHOWN, USE THE THIRD HOLES FROM CENTER PIVOT. FIGURE 6 YANMAR L100EĆD DETAILS ITEM NO. 1 2 3 4 5 6 7 8 PART NO. DESCRIPTION 19 GOVERNOR ATTACHED TO ENGINE QTY.
6 10 27 26 25 FOR ENGINE GASKETS (NONE SHOWN) ORDER KIT #237395 FIGURE 8 KOHLER K301T DETAILS ITEM NO. 1 PART NO. DESCRIPTION QTY.
FIGURE 7 JOB CART DETAILS ITEM NO. 1 2 3 4 5 PART NO. 00748 05601 07019 01056 07018 DESCRIPTION QTY.