Installation guide

Pre-Installation Procedures
32 ePolicy Orchestrator
™
software version 3.0
Downloading the software
Use this procedure to download the software from the McAfee Security web site
and extract the Setup program and other files that you need to install the software.
1 Go to the McAfee Security download web site. For more information, see
Contacting McAfee Security & Network Associates on page 11.
2 Download the following files to a temporary location; for example, C:\TEMP:
w EPO300B.EXE
w EPO300B.C00
w EPO300B.C01
3 On the taskbar, click the Start button, then point to Run. The Run dialog box
appears.
4 In Open, type the path where the EPO300B.EXE file is located (for example,
C:\TEMP\EPO300B.EXE), then click OK. The WinAce v2.0 Self-Extractor dialog
box appears.
5 Click Extract to create the EPO300SHIPPING_FULL.ZIP file, which contains the
Setup program and other files you need to install the software.
6 Extract the files from EPO300SHIPPING_FULL.ZIP to a temporary location; for
example,
C:\TEMP. Be sure to select the option to extract the files using folder
names.
NOTE
Keep these files; you need them to deploy products.
7 On the taskbar, click the Start button, then point to Run. The Run dialog box
appears.
8 In Open, type the path where the Setup program (SETUP.EXE) is located (for
example,
C:\TEMP\SETUP.EXE), then click OK. The ePolicy Orchestrator 3.0
Setup
wizard appears. For installation instructions, see Installing the Software
for the First-Time on page 39, Upgrading from Version 2.0, 2.5, or 2.5.1 on page 57,
or Migrating to a Licensed Version of the Software on page 75.
If the message,
Required installer files are missing appears, repeat Step 6, being
sure to select the option to extract the files using folder names.