User manual

Maintenance Analysis Procedures
3-37
Maintenence Analysis Procedures
23
A zone merge process failed during ISL initialization. The following
list explains the reason:
• Reason 01 - An invalid data length condition caused an error in
a zone merge frame.
• Reason 08 - An invalid zone set format caused an error in a
zone merge frame.
• Reason F0 - A retry limit reached condition caused an error in a
zone merge frame.
• Reason F1 - An invalid response length condition caused an
error in a zone merge frame.
• Reason F2 - An invalid response code caused an error in a zone
merge frame.
Disconnect the fiber-optic jumper cable from the E_Port reporting the
problem, then reconnect the cable to the same port.
Was the maintenance action successful?
NO YES
↓ The fabric, ISL, and product are operational. Exit MAP.
Perform a data collection and contact the next level of support. Refer
to Collect Maintenance Data. Exit MAP.
24
A zone merge process failed during ISL initialization. The following
list explains the reason:
• Reason 09 - Invalid data caused a zone merge failure.
• Reason 0A - A Cannot Merge condition caused a zone merge
failure.
F0 Retry limit reached. Go to step 23.
F1 Invalid response length. Go to step 23.
F2 Invalid response code. Go to step 23.
Table 3-14 Fabric Merge Failure Reasons and Actions (Continued)
Bytes 8 - 11 Merge Failure Reason Action