User manual

4-26
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Repair Information
6. The switch IP address resets to the default address of 10.1.1.10.
— If the configured IP address (prior to reset) was the same as
the default address, the browser-to-switch Internet connection
is not affected and the procedure is complete.
— If the configured IP address (prior to reset) was not the
same as the default address, the browser-to-switch Internet
connection drops and the EFCM Basic Edition session is lost.
Continue to the next step.
7. To change the switch IP address and restart the EFCM Basic
Edition interface, refer to Configure Network Information. To restart
the EFCM Basic Edition interface using the default IP address of
10.1.1.10:
a. At the browser, enter the default IP address of 10.1.1.10 as the
Internet URL. The Enter Network Password dialog box displays.
b. Type the default user name and password.
NOTE: The default user name is Administrator and the default
password is password. The user name and password are
case-sensitive.
c. Click OK. The EFCM Basic Edition interface opens and the
procedure is complete.