User manual

A-30
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Event Code Tables
Event Code: 445
Message: ASIC detected a system anomaly.
Severity: Informational.
Explanation: The application-specific integrated chip (ASIC) detected a deviation in the normal operating mode or operating
status of the switch.
Action: No action required. An additional event code is generated if this incident exceeds an error threshold that results in
a system event.
Event Data: Byte 0 = embedded port number. Byte 12 = detecting port.
Byte 1 = anomaly reason code. Byte 13 = connected port.
Bytes 4 - 7 = elapsed millisecond tick count. Bytes 16 and 17 = HA error callout #3.
Bytes 8 and 9 = HA error callout #1. Bytes 18 and 19 = HA error callout #4.
Bytes 10 and 11 = HA error callout #2.
Distribution: Product Management Server Host
EFCM Basic
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Log
✔
Event Code: 453
Message: New feature key installed.
Severity: Informational.
Explanation: This event occurs when a new feature key is installed from the management server or EFCM Basic Edition
interface. The switch performs an IPL when the feature key is enabled. Event data indicates the feature(s)
installed.
Action: No action required.
Event Data: Byte 0 = feature description as follows: 00 - 04 = flexport technology, 06 = open systems management server,
07 = FICON management server. Byte 1 = feature description as follows: 01 = full volatility, 02 = FICON cup
zoning, 03 = SANtegrity authentication, 05 = hardware trunking, 06 = SANtegrity binding, 07 = open trunking.
Distribution: Product Management Server Host
EFCM Basic
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Log
✔