User manual

A-32
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Event Code Tables
Event Code: 508
Message: Fibre Channel port anomaly detected.
Severity: Informational.
Explanation: The switch detected a deviation in the normal operating mode or status of the indicated Fibre Channel port.
Action: No action required. An event code 506 is generated if this anomaly results in a hard port failure.
Event Data: Byte 0 = port number. Byte 12 = detecting port.
Byte 1 = anomaly reason code. Byte 13 = connected port.
Bytes 4 - 7 = elapsed millisecond tick count. Bytes 16 and 17 = HA error callout #3.
Bytes 8 and 9 = HA error callout #1. Bytes 18 and 19 = HA error callout #4.
Bytes 10 and 11 = HA error callout #2.
Distribution: Product Management Server Host
EFCM Basic
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Log
Event Code: 510
Message: Optical transceiver hot-insertion initiated.
Severity: Informational.
Explanation: Installation of an optical transceiver was initiated with the switch powered on and operational. The event indicates
operational firmware detected the presence of the transceiver.
Action: No action required.
Event Data: Byte 0 = port number.
Byte 2 = optic type.
Bytes 4 - 7 = elapsed millisecond tick count.
Bytes 8 - 11 = optic serial number.
Distribution: Product Management Server Host
EFCM Basic
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Log