User manual

2-16

McDATA Sphereon 4300 Fabric Switch Installation and Service Manual

Installation Tasks

Configure Port NPIV

NPIV allows multiple (up to 256) Fibre Channel addresses to be

assigned to a node (N_Port). The NPIV feature must be installed.

Refer to Install PFE Keys (Optional) for instructions. Perform this

procedure to configure ports for NPIV connectivity.

1. Select Ports and NPIV from the Configure menu at any view. The

NPIV View displays.

2. Click Enable to activate product NPIV operation.

3. To set a port to a user-specified value, type the desired value

(1 through 256) in the Login column.

4. Click OK to save and activate changes.

Configure SNMP

Perform this procedure to configure names, write authorizations,

addresses, and user datagram protocol (UDP) port numbers for

SNMP trap message recipients. To configure recipient workstations:

1. Select SNMP from the Configure menu at any view. The SNMP

View displays (Figure 2-8).

Figure 2-8 SNMP View