Specifications

Fibre Channel Switch Requirements
Requirements for Brocade Switches
2-12 UltraNet Edge Storage Router 3000 Version 3.2 Release Notes
switchId: fffc02
switchWwn: 10:00:00:60:69:c0:0b:1b
switchBeacon: OFF
Zoning: ON (Active)
port 0: id 2G Online E_port 20:00:00:00:88:19:71:ca (upstream)
port 1: id N2 No_Light
port 2: id N2 No_Light
port 3: id N2 No_Light
port 4: id N2 No_Light
port 5: -- N2 No_Module
port 6: -- N2 No_Module
port 7: -- N2 No_Module
Switch:admin>
In the preceding output, 2G Online.....E_port 20:00:00:00:88:19:71:ca (upstream)
indicates that a successful E_port has been established. If it was unsuccessful, a world wide name
would not appear and it would say
E_port (no license).
Configuring the Port Settings for Brocade Switches 3250, 3850, 3900, 4100,
12000, and 24000
The Speed and ISL R_RDY Mode should be configured using the following procedure. The
Brocade port connected to the UltraNet Edge 3000 should be configured to 2G (step 2 below).
1. Enter the
portcfgshow command to display the current port settings:
Switch:admin> portcfgshow
Example of the portcfgshow command screen display:
Ports 0 1 2 3 4 5 6 7
-------------------+--+--+--+--+----+--+--+--
Speed AN AN AN AN AN AN AN AN
Locked L_Port .. .. .. .. .. .. .. ..
Locked G_Port .. .. .. .. .. .. .. ..
Disabled E_Port .. .. .. .. .. .. .. ..
Persistent Disable .. .. .. .. .. .. .. ..
ISL R_RDY Mode .. .. .. .. .. .. .. ..
where AN:AutoNegotiate, ..:OFF, ??:INVALID.
The current speed for port 0 (zero) is set for Auto Negotiate, indicated by the AN.