Specifications

Fibre Channel Switch Requirements
Requirements for Brocade Switches
2-14 UltraNet Edge Storage Router 3000 Version 3.2 Release Notes
fabric: Subordinate switch
fabric: Domain 2,1
• For a Brocade 12000 or 24000, use the following syntax:
Usage: portCfgISLMode [SlotNumber/]PortNumber Mode
Example of the portcfgISLMode command screen display:
Ports 0 1 2 3 4 5 6 7
-------------------+--+--+--+--+----+--+--+--
Speed 2G AN AN AN AN AN AN AN
Locked L_Port .. .. .. .. .. .. .. ..
Locked G_Port .. .. .. .. .. .. .. ..
Disabled E_Port .. .. .. .. .. .. .. ..
Persistent Disable .. .. .. .. .. .. .. ..
ISL R_RDY Mode ON .. .. .. .. .. .. ..
where AN:AutoNegotiate, ..:OFF, ??:INVALID.
The ISL R_RDY Mode for port 0 is now ON.
4. To configure the locked G_port for device extension, use the following syntax:
Usage: portCfGport slot number/port number, mode
Example of the portCfgGport command screen display, where 1 = locked:
sw5:admin> portCfgGport 1/3, 1
Done.
Viewing the Switch Settings
To view the settings for the switch, enter the
switchshow command. The following is an example
output.
Switch:admin> switchshow
switchshow
switchName: Switch
switchType: 16.2
switchState: Online
switchMode: Native
switchRole: Subordinate