Specifications

UltraNet ConfigManager
Procedures for Changing the Default Software Version
3-4 UltraNet Edge Storage Router 3000 Version 3.2 Release Notes
Procedures for Changing the Default Software Version
The default Edge 3000 software version can be changed for the entire network or for the existing
nodes on the Network Map.
Changing the Default Version for the Entire Network
Use the following procedure to change the default Edge 3000 software version for the entire
network.
Note: This change takes effect for the next node that is added to the Network Map. To
change the Edge 3000 software version for existing nodes on the Network Map, refer to the
“Changing the Version for Existing Nodes on the Network Map” procedure in this chapter.
1. Select the Options from the Tools Menu.
2. Once the Options dialog appears, click the UltraNode tab.
3. From the UltraNode tab, select the appropriate software version from the Default Version
drop-down list in the Edge Node section of the dialog. All selectable software versions are
displayed.
4. Click OK or Apply to accept the change.
Changing the Version for Existing Nodes on the Network Map
To change the Edge 3000 software for existing nodes on the Network Map, select the Node Version
Wizard function from the Tools Menu. The Node Version Wizard allows you to change the version
for one or more nodes.