Specifications

Listen-in /2 way voice integrated and routed to Op- erators
over IP is standard in D6. You get more tools for alarm verification
without the high cost of PBX systems and you get the space
saving of skipping wire trunks and telephony equip- ment. D6
audio IP is integrated in MCDI SP’s SECURITHOR Monitoring
Software to automatically route audio feeds to the operator
processing the alarm.
Attention to design
with front service for live hot swap maintenance. Upgrades
and support are handled over IP by MCDI SP Support staff. No
mechanical parts for operation and fan-less design insure your
receiver does not go down because of prone to break parts.
Out of the box operation: No factory technicians needed to
set-up nor strange menus. Power up and you are ready to
use most features.
A workhorse for Central Monitoring Stations!
Get 6 phone lines in just one rack-mount unit for real space saving! With a processor for each 6 lines, 3
power sources for each D5/D6 and unique MCDI SP Cognitum programming, you get real integrated
redundancy you can count one, without the costs of big boxes.
Attention to details such as front ser-
vice and fan-less design are part of the
D5 and D6 design
.
RoHS compliance: Receivers for the EXTRIUM family are the
only receivers RoHS compliant to Europe and Japan ecologi-
cal electronic manufacturing directives. D5/D6 do not contain
lead, cadmium or PBB.
ARM processor and embedded linux to get fast, reliable com-
puting without compromise.
MCDI triple power redundancy: AC feed, 12V DC battery in-
put and internal one hour lithium-ion battery. All with auto-
matic fall-over for the best uptime even during major power
outage.
Highest memory available on the market: 8.000,000 events
are stored on removable SD card. Logs are exportable to con-
nected PC for analysis.
Advanced Signal reporting D5/D6 programming is based on
MCDI SP Cognitum. Cognitum stands for knowledge and D5/D6
will let you report alarm signals nearly everywhere you want.
D5/D6 are able to get alarm signals to several destinations over
serial, usb and IP ports allowing back-up Centrals to take over
and signal logging to a remote building. 4 IP destinations can
be programmed in D5 and D6.
Integrated fall over/heartbeat management
When a destination does not send acknowledge of an event,
D5 and D6 Cognitum programming automatically sends events
to alternate destination. An alternate Control Room can take
over when main Control Room does not send acknowledge.
With Cognitum unique fall over signal management you can
insure the best uptime to your dealers and subscribers.
This unique ability to report to several destinations makes D5
and D6 the best choices for dual reporting from remote fac-
tory plants, embassies and regional monitoring to headquarters
insuring not only tremendous phone saving costs but giving
the opportunity to gather alarm signal information from any-
where in the world. Coupled with D5 and D6 abilities to work
unattended and being controlled from distance, you get a truly
unique professional receiver.
Email reports D5 and D6 send internal messages and Daily
Status report to 4 emails addresses. Connection to the internet
required.
Where do you want your alarm signals to go?
With the unique ability to report to several destinations, D5 and D6 are the best
choice for dual reporting from remote factory plants, embassies and regional moni-
toring to headquarters insuring not only tremendous phone saving costs but giving
the opportunity to gather alarm signal information from anywhere in the world.
Coupled with D5 and D6 abilities to work unattended and being controlled from
distance, you get a truly unique professional receiver.
D6 is the best choice
for dual reporting and 2
way voice