Service manual

Commercial in confidence
SMARTFIND NAVTEX service manual Page 16
Removal of LCD Screen
NOTE: This should only be done in clean room conditions – any dust present may
be attracted to the screen and will show up when next powered up.
1. Follow previous instructions to remove back box and display PCB.
2. Remove the keypad – this lifts out. Pull carefully from top and bottom – take
care not to tear the keypad.
3. Remove the 4 off screws and washers retaining the display.
4. The display can now be lifted out. If the LCD is being re-used cover the screen
immediately to protect from dust or place in a anti-static bag.
The fascia/window assembly is supplied complete – if it is damaged please order
a replacement assembly.