Troubleshooting guide

5. Automatic Air Swing (optional)

v Press the SWING button to activate the automatic air swing function.

v To distribute the air to a specific direction, press the SWING button and wait until the louver

move to the desired direction and press the button once again.

6a. Silent Function

v Press for quiet operation.

v Fan speed turn to minimum speed.

v Press again to deactivate the function.

6b. Ionizer Function

v Press button to activate the negative ion function, which will refresh the indoor air effectively.

7. Sleep Mode Setting

v Press the SLEEP button will activate the sleep mode function. This function is available under

COOL, HEAT and AUTO mode.

v When the unit is operating under cooling mode, the set temperature is increased by 0.5°C after

30 minutes, 1°C after an hour, and 2°C after 2 hours.

v When the unit is operating under heating mode, the set temperature is decreased by 1°C after 30

minutes, 2°C after an hour, and 3°C after 2 hours.

8. Operating Mode

v Press the MODE button to select the type of operating mode.

v For cooling only unit, the available modes are: COOL ( ), DRY ( ) and FAN ( ).

9. Fan Speed Selection

v Press the button continuously will toggle the fan speed in the following order:

Low Med High Auto

v Stop pressing when the desired fan speed appears on the display screen.

10. “ON/OFF” Button

v Press one to start the air conditioner unit.

v Press again to stop the unit.

11. Timer Cancel

v Press the TIMER CANCEL button to cancel the on timer setting.

12. OFF Timer Setting

v Press the OFF TIMER button will activate the off timer function.

v Set the desired off time by pressing the OFF TIMER button continuously.

13. ON Timer Setting

v Press the ON TIMER button will activate the on timer function.

v Set the desired on time by pressing the ON TIMER button continuously. If the timer is set to

7.30am, the air conditioner will turn on at 7.30am sharp.

14. Turbo Function

v Press for fast cooling.

v Fan speed turn to maximum speed.

v Press again to deactivate the function.

15. Clock Time Setting

v Press and hold to set the clock time.