Troubleshooting guide

6. “SLEEP” Mode

v Press button to activate the sleep function. This function can only be activated under “cool” or heating

mode operation. When it is activated under “cool” mode operation, the set temperature will increase

0.5°C after 30 minutes, 1°C after 1 hour and 2°C after 2 hours. If it is activated under “HEAT” mode

operation, the set temperature will be decreased 0.5°C after 30 minutes, 1°C after 1 hour and 2°C

after 2 hours.

7. Air Swing

v Press button to activate the automatic air swing function.

8. Sensor

v Infra red sensor to receive signals from wireless controller.

9. LED Display

v To display the set temperature (in °C) and timer delay setting (in hours).

10. Transmission Source

v To transmit signals to the air conditioner.